E-Bike Maintenance Guide (Canada Edition)

Keeping your e-bike in top condition ensures a longer lifespan, smoother rides, better performance, and safer daily use. Whether you ride all year or seasonally, this Canadian-focused guide covers the essential maintenance steps every e-bike owner should follow.

1. Before Every Ride – Quick Safety Check

• A 30-second inspection can prevent most issues.
  
• Check tire pressure (recommended PSI listed on the sidewall).
  
• Inspect brakes for responsiveness and unusual rubbing.
  
• Confirm battery is locked in place and charged.
  
• Look for loose bolts, especially on handlebars, stem, and seatpost.
  
• Test lights, especially if riding early morning or evenings.

2. Battery Care – Make Your Battery Last Longer

Your e-bike’s battery is its most valuable component. Proper care extends its lifespan significantly.

Best Practices

• Charge between 20%–80% for everyday use.
  
• Store the battery indoors at room temperature.
  
• Avoid charging immediately after a cold winter ride; let it warm up first.
  
• Use only the official charger that comes with your e-bike.
  
• During long storage periods, keep the battery at 50–70% and recharge monthly.

Cold Weather Tips (Important for Canada)

• Lithium batteries lose performance in cold weather — expect reduced range in winter.
  
• Bring the battery inside overnight.
  
• Never leave your battery in freezing temperatures for long periods.

3. Cleaning Your E-Bike

Clean bikes last longer and ride smoother.

How to Clean Safely

• Use a damp cloth, mild soap, or bike cleaner.
  
• Avoid spraying water directly into the motor, display, or battery ports.
  
• Do not use pressure washers — they push water into electrical components.
  
• Dry the bike with a cloth to prevent rust, especially after salty winter roads.

Chain & Drivetrain Cleaning

• Apply bike-specific chain lube after cleaning.
  
• Wipe off excess oil to prevent dirt buildup.
  
• Clean and lube more often if riding in rain, gravel, or snow.

4. Tire Pressure & Wear

Proper tire care ensures safety and longer-lasting components.

• Check tire pressure weekly.
  
• Fat tires may require 15–30 PSI, while city tires often need 45–65 PSI.
  
• Inspect tread for cuts, cracking, or worn-down patterns.
  
• Low tire pressure reduces range and increases motor strain.

5. Brake Maintenance

E-bikes are heavier and faster—brakes need more frequent checks.

• Inspect brake pads monthly.
  
• Replace if the pad material is 1–2 mm or less.
  
• Hydraulic brakes may require occasional bleeding for optimal performance.
  
• Listen for squealing or rubbing noises and adjust accordingly.
  
• If you’re unsure how to adjust brakes, any reputable bike shop in Canada can assist.

6. Keeping Bolts Tight

Vibration from riding loosens bolts over time.

Every 2–4 weeks, check:

• handlebar clamp bolts
  
• stem bolts
  
• seatpost clamp
  
• rack and fender bolts

* Use the correct torque (if provided by manufacturer).

7. Motor & Electronics

Most e-bike motors are low-maintenance, but you should:

• Keep the motor area clean and dry.
  
• Avoid submerging the bike in water or slush puddles.
  
• Never open the motor casing yourself (voids warranty).
  
• Update firmware if your e-bike model supports it.

8. Seasonal Maintenance (Canada-Focused)

Spring

1. Recharge battery fully after winter storage.
   
2. Inspect tires for cracking after cold weather.
   
3. Give the chain a full clean and lubrication.

Summer

1. Watch for overheating on long hill climbs.
   
2. Avoid leaving battery in direct sun.

Fall

1. Clean off mud and leaves that collect in drivetrain.
   
2. Inspect brake pads — they wear faster in wet conditions.

Winter

1. Store battery indoors.
   
2. Clean your bike more often to remove road salt.
   
3. Consider switching to studded winter tires for safety.
   
4. Reduce pedal assist in extreme cold to preserve battery life.

9. Annual Full Service

At least once per year, get your e-bike professionally checked.

A typical Canadian annual tune-up includes:

1. Brake bleed or adjustment
   
2. Drivetrain cleaning
   
3. Gear indexing
   
4. Electrical system inspection
   
5. Bearing and bolt checks
   
6. Tire inspection and replacement if needed

While New Brunswick Bikes does not perform repairs in-house, we can recommend trusted local service providers and help with ordering official Eunorau parts when needed.

10. Tips for Maximizing Lifespan

• Avoid hard impacts (curbs, jumps, deep potholes).
  
• Keep firmware and displays updated (if applicable).
  
• Store indoors whenever possible.
  
• Keep your battery clean and dry.
  
• Use a quality lock to protect your investment.

Ride With Confidence

By following these maintenance steps, your e-bike will stay efficient, powerful, and reliable for years. Whether you purchased your e-bike in-store at Brunswick Square or online at Newbrunswickbikes.com, you’re always welcome to contact us for questions, support, or referral recommendations.

BUY NOW, PAY LATER WITH 0% INTEREST.

Afterpay in Canada allows you to buy an E-Bike and pay for them in four equal, interest-free instalments every two weeks. The first payment is due at the time of purchase, and the remaining three are automatically debited from your linked credit or debit card on a bi-weekly schedule. You must have a valid Canadian billing and shipping address, a Canada-based credit/debit card, and meet age and mobile number requirements.